
|

|
Over 30 Years of instrumentation design and calibration experience!
|

|







 |

|
The Model 320
The Model 320 is a simplification of the Model 400. As in
the 400, a built-in computer allows storing of sensor readings
and calculations of average value and percent deviations.
The two line display format allows for several readings
at one time. The Model 320 measures MW/CM2, peak
MW/CM2, MJ/CM2 (single pulse), accumulated
MJ/CM2, time (single pulse), and accumulated
seconds.
The Model 320 has four modes of operation. Mode 3 (MW/CM2)
and Mode 4 (MJ/CM2) allow taking five readings
in a fixed pattern and then displaying the average value
and the +/-% uniformity as well as the +/-% deviation from
the center value.
The rechargeable battery lasts for about 18 hours and the
charger operates from 100-240 VAC, 50-60 Hz with UL, CE,
and TUV approvals.
A variety of sensor packages can be used with the Model
320 at wavelengths from 220nm to 540nm and beyond. Traceability
to NIST is +/-3.0% with probe matching to +/-1.0%. The Model
320 can be set up to work with a dual channel probe.
|
|
Model 320 features
- Less than 1% Probe to Probe Repeatability.
- Real Time Measurements.
- Interchangeable Probes
- Dual channel probe capability
- Cosine response probes
- Measures MW/CM2, peak MW/CM2, MJ/CM2
(SP), accumulated MJ/CM2 time (seconds), and accumulated
time
- Calculates average value, % uniformity and % deviation from
center value
- Battery operates for approximately 18 hours before recharge
- Charger operates from 100-240 VAC, 50-60 Hz with UL, CE, and
TUV approvals
|
This graph
accurately represents the spectral response of probes used today
in the Microelectronic Industry. This graph includes the spectral
response of the detector as well as the spectral response of the
filter glass used in probes.
|
Model 320 Specifications
|
Switch Functions:
|
- Red button - ON (hold for one second)
Off when displayed and MORE (data review)
- Two black buttons for Mode, Reset
SEL (select), Back (data review)
- Channel A, Channel B switch (optional)
|
|
Display:
|
|
|
Range:
|
- MW/CM2 - .1 to 999.9 (peak same)
- MJ/CM2 - .1 to 9999.9
- Time - .001 to 99.999 seconds
|
Mode Selection:
|
Mode 1:
|
- MW/CM2 and peak MW/CM2 continuous
display
|
|
Mode 2:
|
- MJ/CM2 (single pulse) and accumulated MJ/CM2
- Time (seconds) and accumulated time.
- Single pulse - MJ/CM2 and time update automatically
with new signal
|
|
Mode 3:
|
- Five readings of mw/CM2 in a *fixed pattern
using a one second shutter opening (minimum) to read
mw/CM2
- Display of average mw/CM2 and +/-% uniformity
- Display of +/-% deviation of each reading from center value
- Display of all five values (3 digits)
|
|
Mode 4:
|
- Five readings of MJ/CM2 in a *fixed pattern ~
shutter control
- Display of average MJ/CM2 and +/-% uniformity
- Display of +/-% deviation from center reading
|
|
Display Pattern:
|
|
|
Power:
|
- Built in rechargeable battery - 18 hours operation
(approx.)
- Recharge time 6 hours (unit off) - indicated by
LED (goes dim and then off when fully charged)
- Low battery indication on display next to 'OFF'
- Charger - 100-240 VAC, 50-60 Hz
- Charger is UL, CE, TUV approved
|
|
|
Probe Wavelengths:
|
- 220nm, 248nm, 254nm, 260nm, 280nm, 310nm, 365nm,
400nm, 420nm, 436nm, 540nm, and more
|
|
|
Size:
|
- 5.5 in. W (14 cm) x 7.4 in. L (18.8 cm) x 1.5 in.
H (3.8 cm)
|
|
|
Weight:
|
|
|
|
|