The Model 200
The Model 200 Intensity Meter is an upgrade of the G & R Labs Model 100S with an all metal case. This unit operates from a single 9-volt battery and meets all the requirements of IEC, UL, and CSA. The measurement range is from 1.00 MW/CM2 to 19.999 W/CM2 (20MW/CM2) in two scale positions. The peak switch allows measuring and holding the maximum reading that the probe encounters. The hold switch locks any reading that is of interest. A variety of probes are available with the Model 200 to measure many different exposure processes including UV curing. Probe wavelengths from 220nm to the visible range are standard. The Model 200 can be supplied in a dual channel configuration, Channel A & Channel B.
|
|
Specifications:
Switch Functions:
- Power-On
- Hold-On
- Peak-On
- 200 MW/CM2-W/CM2
Display
- LCD 4,5 digit with low battery
Range
- 200 MW/CM2-1.00 MW/CM2 to 199.99 MW/CM2
- 20.0 W/CM2-.100 W/CM2 to 19.999 W/CM2
Power
- One standard 9-volt battery
Probe Wavelengths
- 220nm, 254nm, 260nm, 280nm, 310nm, 365nm, 400nm, 420nm, 436nm, and more
NIST Traceability
- ±3.0%
Meter Dimensions
- 6.0 in. × 2.75 in. × 1.13 in.
- Comes in carrying case
|
